General Donald M. Murphy  

Shower Tile Installation

Remodeling a restroom is difficult, time-consuming, and potentially demanding, however likewise gratifying when the work is completed. In my previous posts, I clarified exactly how to:

  • Layout a bathroom
  • Measure for tile
  • Demolition a washroom
  • Mount a bathtub, commode, as well as, etc.

Style a design. To appropriately install ceramic tile, you require to very first install a short-term ledger board. To establish where to mount the ledger board, measure up from the tub deck the size of the bottom ceramic tile plus 2 cement lines.

Functioning from an instance in a previous write-up, the journal board must be set at 8 5/16 inches from the bathtub deck.

Ceramic tile size.
8 1/16 inches.

Cement line between the bathtub deck and also lower tile.
1/8 inches.

Grout line between bottom ceramic tile and the 2nd row of the tile.
1/8 inches.

Total.
8 1/16 + 1/8 + 1/8 = 8 5/16 inches.

After your ledger board is installed, it is now time to set the shower floor tile.

For setting wall surface floor tile in a shower, you will require a quick collection of mortar. The benefit of fast-set mortar is the floor tile will certainly stick to the wall surface better as well as not sag. Use sanded mortar thin set when putting on cement. Utilize a latex-modified mortar thin set if you’re applying to vinyl or timber substrates. Do not utilize mastic for establishing shower a shower! Mastic will certainly damage gradually from the wetness of the shower.

To blend the mud base, you will certainly require a 5-gallon pail as well as a water supply together with your drill and blending a little bit. Mix the mortar as per the producer’s suggestion and mix in small sets, as it will dry promptly. When mixing the mortar in small batches, intend on blending several sets of mortar to survive establishing the shower ceramic tile. With quick collection mortar, you do not have to set a row of tile, wait 24 hours for the mortar to cure, set another row of floor tile, wait another 24 hours, and so forth as you would with regular thin collection mortar.

I urge you to open up various boxes of the ceramic tile you are using for the shower. As you are establishing the floor tile, use ceramic tile from a variety of boxes to help remove any color variants in the tile from box to box. To view more Shower Tile Installation articles, visit HolyCitySinner for more info.

Intend on making cuts when setting tile. You can rent a ceramic floor tile attended to assist with these cuts. If you are setting the tile on your own, I recommend mounting the complete pieces of tile first. When you require to mix extra mortar is a good time to determine and reduce the needed items of tile. In this manner, you do not need to fret about the thin collection drying out as you are determining and cutting tiles one by one.

To begin establishing the tile, spread the mixed mortar on the ceramic tile. Make use of a square notched trowel 1/4 of an inch to 3/8 of an inch to spread the mortar on the floor tile. Describe the supplier’s instructions for the mortar and also make use of a proper-sized trowel according to their specs.

Press the floor tile onto the wall surface. Strongly press each floor tile in position and give it a small twisting movement to ensure it makes great contact with the adhesive. As you function your method along the shower wall surface, place ceramic tile spacers on all 4 sides of each tile to help maintain your cement lines regular with the various other tiles that are set. Do not glide the floor tile greater than 1/2 of an inch to set in the area. Remove your first couple of pieces of ceramic tile to check and make certain the thin set is equally used over the tile.